To the top of the document
Cruze
   
GMDE Start Page Load static TOC Load dynamic TOC Help?

Generator, Air Conditioning Compressor, and Power Steering Pump Belt Replacement

Removal Procedure
  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
  2. Remove the front compartment splash shield. Refer to Front Compartment Splash Shield Replacement .

    3. 2188923
  3. Rotate the drive belt tensioner bolt (2) clockwise.
  4. Remove the drive belt (1) while pulling the drive belt tensioner by a suitable tool (3).

Installation Procedure

    2188923
  1. Rotate the drive belt tensioner bolt (2) clockwise.
  2. Install the drive belt (1) while pulling the tensioner by a suitable tool (3).
  3. Rotate the tensioner counterclockwise to tension the drive belt (2).
  4. Install the front compartment splash shield. Refer to Front Compartment Splash Shield Replacement .
  5. Lower the vehicle. Refer to Lifting and Jacking the Vehicle .
   


© Copyright Chevrolet. All rights reserved