To the top of the document
Cruze
   
GMDE Start Page Load static TOC Load dynamic TOC Help?

Engine Sight Shield Replacement

Removal Procedure

    2189053
  1. Open the hood.
  2. Remove the engine sight shield nuts (1).
  3. Remove the engine sight shield bolts (2).
  4. Remove the engine sight shield (3).

Installation Procedure

    2189053
  1. Install the engine sight shield (3).

    2. Caution: Refer to Fastener Caution in the Preface section.

  2. Install the engine sight shield bolts (2) and tighten to 9 N·m (80 lb in).
  3. Install the engine sight shield nuts (1) and tighten to 9 N·m (80 lb in).
  4. Close the hood.
   


© Copyright Chevrolet. All rights reserved