Cruze

Battery Tray Replacement

1. Open the bonnet.
2. Remove the battery. Refer to Battery Replacement .
3. Unclip all wiring harnesses from the battery tray.
4. Unclip the engine control module bracket from the battery tray.
5. If equipped, unclip the radiator surge tank engine hose from the battery tray.
6. Unclip the battery current sensor from the battery tray.



7. Remove the 3 battery tray bolts (1).
8. Remove the battery tray (2).

1. Install the battery tray (2).

Caution: Refer to Fastener Caution in the Preface section.

2. Install the 3 battery tray bolts (1) and tighten to 15 N·m (11 lb ft).
3. Clip in the battery current sensor to the battery tray.
4. If equipped, clip in the radiator surge tank engine hose to the battery tray.
5. Install battery. Refer to Battery Replacement .
6. Clip in all wiring harness at the battery tray.
7. Clip in the engine control module bracket to the battery tray.
8. Close the bonnet.