Preliminary Procedures

1. Remove the air cleaner assembly. Refer to Air Cleaner Assembly Replacement .
2. Support the engine. Install a suitable engine lifting device. Install a suitable cable at the 3 engine lift brackets and at the engine lifting device.

1

Engine Mount Bolt (Qty: 2)

Caution: Refer to Fastener Caution in the Preface section.

Tighten
62 N·m (46 lb ft)

2

Engine Mount Bracket Bolt (Qty: 3)

Caution: Refer to Torque-to-Yield Fastener Caution in the Preface section.

Procedure

Install NEW bolts, do NOT reuse old bolts

Tighten
50 N·m + 60°-75° (37 lb ft + 60°-75°)

3

Engine Mount Nut

Tighten
62 N·m (46 lb ft)

4

Engine Mount