To the top of the document
Cruze
   
GMDE Start Page Load static TOC Load dynamic TOC Help?

Camshaft Position Sensor Replacement

Removal Procedure
  1. Open the bonnet.
  2. Remove the air cleaner outlet front duct. Refer to Air Cleaner Outlet Front Duct Replacement .

    3. 2191786
  3. Disconnect the camshaft position sensor wiring harness plug (3) and hang aside.
  4. Remove the camshaft position sensor bolt (2).
  5. Remove the camshaft position sensor (1).

Installation Procedure

    2191786
  1. Install the camshaft position sensor (1).

    2. Caution: Refer to Fastener Caution in the Preface section.

  2. Install the camshaft position sensor bolt (2) and tighten to 10 N·m (89 lb in).
  3. Connect the camshaft position sensor wiring harness plug (3).
  4. Install the air cleaner outlet front duct. Refer to Air Cleaner Outlet Front Duct Replacement .
  5. Close the bonnet.
   


© Copyright Chevrolet. All rights reserved