To the top of the document
Cruze
   
GMDE Start Page Load static TOC Load dynamic TOC Help?

Mass Airflow Sensor Replacement

Removal Procedure

    2191778
  1. Open the bonnet.
  2. Disconnect the Wiring Harness Plug (2).
  3. Loosen the 2 clamps (3).
  4. Remove the mass airflow sensor (1).

Installation Procedure

    2191778
  1. Install the mass airflow sensor (1).

    2. Caution: Refer to Fastener Caution in the Preface section.

  2. Fasten the 2 clamps (3) to 3.5 N·m (31 lb in).
  3. Connect the wiring harness plug (2).
  4. Close the bonnet.
   


© Copyright Chevrolet. All rights reserved