Cruze

Transmission Mount Bracket Replacement - Left Side

Special Tools

CH-49290 Engine Support Tool

For equivalent regional tools, refer to Special Tools .

1. Remove battery tray. Refer to Battery Tray Replacement .
2. Raise vehicle. Refer to Lifting and Jacking the Vehicle .
3. Install CH-49290 engine support tool. For assembly use attached installation manual.
4. Lower vehicle.



5. Remove and DISCARD 3 transmission mount bolts (1).



6. Remove 2 transmission mount bolts (1, 3) and transmission mount nut (2).



7. Remove transmission mount (1).



8. Remove 3 transmission mount bracket bolts (1).
9. Remove transmission mount bracket (2).

1. Install transmission mount bracket (2).

Caution: Refer to Fastener Caution in the Preface section.

Caution: Refer to Torque-to-Yield Fastener Caution in the Preface section.

2. Install 3 transmission mount bracket bolts (1) and tighten to 100 N·m (74 lb ft).



3. Install transmission mount (1).



4. Install 2 transmission mount bolts (1, 3) and tighten to 62 N·m (46 lb ft).
5. Install transmission mount nut (2) and tighten to 62 N·m (46 lb ft).



6. Install 3 NEW transmission mount bolts (1) and tighten to 50 N·m + 60° - 75° (37 lb ft + 60° - 75°).
7. Raise vehicle.
8. Remove CH-49290 engine support tool. For the disassembly use attached installation manual.
9. Lower vehicle.
10. Install battery tray. Refer to Battery Tray Replacement .