Cruze

Heater and Blower and Air Conditioning Control Module Replacement — Left Hand Drive

1. Remove the instrument panel compartment. Refer to Instrument Panel Compartment Replacement .
2. Remove the floor air outlet duct right side. Refer to Floor Air Outlet Duct Replacement - Right Side .



3. Remove the 2 heater and blower and air conditioning control module bolts (1).
4. Remove the heater and blower and air conditioning control module (3).

1. Install the heater and blower and air conditioning control module (3).

Caution: Refer to Fastener Caution in the Preface section.

2. Install the 2 heater and blower and air conditioning control module bolts (1) and tighten to 2.5 N·m (22 lb in).
3. Install the floor air outlet duct right side. Refer to Floor Air Outlet Duct Replacement - Right Side .
4. Install the instrument panel compartment. Refer to Instrument Panel Compartment Replacement .
5. After repairs, refer to Control Module References for programming and set up procedures.