Replacing Keys - without BTM
Replacing Keys
Note:
| • | This procedure may be used with or without existing learned keys being present. |
| • | This procedure will take more than 15 minutes to complete. |
| • | A total of 8 keys maybe be learned to a single vehicle. |
| • | This procedure will only learn the vehicle key information. This procedure will not learn any immobiliser information between the body control module (BCM) and engine control module (ECM). |
| • | If the battery voltage is low, charge the battery before continuing with the procedure. |
- Connect a scan tool to the vehicle and access SPS. Refer to Service Programming System (SPS) .
- Ensure that all power consuming devices are turned OFF on the vehicle.
- Select the SPS application and follow the onscreen instructions.
- Select Reprogram ECU.
- Select IMMO Immobiliser Learn.
- Select the Program Transponder or Remote Key function.
- Follow the on-screen instructions.
- With a scan tool, clear any DTCs.
| © Copyright Chevrolet. All rights reserved |
