Preliminary Procedure

1. Remove battery tray. Refer to Battery Tray Replacement .
2. Remove radiator inlet hose. Refer to Radiator Inlet Hose Replacement .
3. Remove charge air cooler outlet air hose. Refer to Charge Air Cooler Outlet Air Hose Replacement .
4. Disconnect the transmission pipe from the radiator and transmission. Refer to Transmission Fluid Cooler Hose/Pipe Quick-Connect Fitting Disconnection and Connection .
5. Note the routing of the transmission pipe to ensure proper installation.
6. Remove the transmission pipe from the clips securing the line to the transmission and inlet pipe.

1

Transmission Fluid Cooler Pipe Nut

Caution: Refer to Fastener Caution in the Preface section.

Tighten
22 N·m (16 lb ft)

2

Sealing Washer

Procedure

DISCARD the sealing washer and use NEW only.

3

Transmission Fluid Cooler Outlet Pipe

Procedure

Fill the transmission to a proper level with the correct fluid. Refer to Transmission Fluid Level and Condition Check and Fluid Capacity Specifications .