Cruze

Transmission Fluid Cooler Hose/Pipe Replacement

1. Remove battery tray. Refer to Battery Tray Replacement .
2. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
3. Remove front bumper fascia. Refer to Front Bumper Fascia Replacement .



4. Remove the fluid level drain plug (1).
5. Drain transmission fluid into a suitable container.



6. Disconnect transmission fluid cooler pipe (2) from transmission fluid auxiliary cooler and radiator. Remove 2 retainers (1). Refer to Transmission Fluid Cooler Hose/Pipe Quick-Connect Fitting Disconnection and Connection .
7. Remove transmission fluid cooler pipe (2).

1. Install transmission fluid cooler pipe (2).

Caution: Refer to Component Fastener Tightening Caution in the Preface section.

2. Connect transmission fluid cooler pipe (2) to transmission fluid auxiliary cooler and radiator. Install 2 retainers (1). Refer to Transmission Fluid Cooler Hose/Pipe Quick-Connect Fitting Disconnection and Connection .

Caution: Refer to Fastener Caution in the Preface section.




3. Install the fluid level drain plug (1) and tighten to 12 N·m (106 lb in).
4. Fill the transmission to a proper level with the correct fluid. Refer to Transmission Fluid Level and Condition Check and Fluid Capacity Specifications .
5. Install front bumper fascia. Refer to Front Bumper Fascia Replacement .
6. Install battery tray. Refer to Battery Tray Replacement .