To the top of the document
Cruze
   
GMDE Start Page Load static TOC Load dynamic TOC Help?

Transmission Control Replacement

Removal Procedure
  1. Remove front floor console. Refer to Front Floor Console Replacement .

    2. 2027556
  2. Remove the gear lever and selector lever cable adjust locks (1).

    3. 2027557
  3. Remove the transmission control bolts (1, 2).

    4. 2027560
  4. Remove the gear lever and selector lever cable retainer (1) from the transmission control.
  5. Disconnect the gear lever and selector lever cables (2) from the selector control adjusters.
  6. Remove the transmission control.

Installation Procedure

    2027560
  1. Connect the gear lever and selector lever cables (2) to the selector control adjusters.
  2. Install the gear lever and selector lever cable retainer (1) to the transmission control.

    3. 2027557
  3. Install the transmission control.

    4. Caution: Refer to Fastener Caution in the Preface section.

  4. Install 4 transmission control lever bolts (1, 2) and tighten to 8 Nm (71 lb in).
  5. Adjust the shift lever and selector lever cable. Refer to Manual Gearbox Gear Lever and Selector Lever Cable Adjustment .
  6. Install the front floor console. Refer to Front Floor Console Replacement .
   


© Copyright Chevrolet. All rights reserved