To the top of the document
Volt
   
GMDE Start Page Load static TOC Load dynamic TOC Help?

Power Steering Control Module Scan Tool Information

Table 1: Power Steering Control Module Scan Tool Data Parameters
Table 2: Power Steering Control Module Scan Tool Output Controls

The power steering control module scan tool data parameters list contains all power steering related parameters that are available on the scan tool. The list is arranged in alphabetical order. A given parameter may appear in any one of the data lists.

Power Steering Control Module Scan Tool Data Parameters

Parameter

System State

Expected Value

Description

Operating Conditions: Ignition ON

Battery Voltage

-

9-16 V

The scan tool displays the current battery voltage.

Ignition Mode

-

On

The scan tool displays On or Off dependent on the current ignition mode.

Power Steering Control Module Scan Tool Output Controls

Output Control

Description

Pressure Control Solenoid Valve

Commands the solenoid valve Increase or Decrease.

   


© Copyright Chevrolet. All rights reserved