To the top of the document
Volt
   
GMDE Start Page Load static TOC Load dynamic TOC Help?

Intake Camshaft Removal


    2190728
  1. Remove the camshaft bearing cap bolts in a spiral sequence as shown one turn at a time until there is no spring tension pushing on the camshaft.

  2. 2190730

    Note: Mind the markings on the camshaft bearing caps to ensure they will be installed in the same position.

  3. Remove the 10 camshaft bearing cap bolts (1).
  4. Remove the 5 camshaft bearing caps (2).
  5. Remove the intake camshaft (3).
   


© Copyright Chevrolet. All rights reserved