To the top of the document
Volt
   
GMDE Start Page Load static TOC Load dynamic TOC Help?

Front Brake Shield Replacement

Removal Procedure

    Warning: Refer to Brake Dust Warning in the Preface section.

    Danger: Do not use a service jack in locations other than those specified to lift this vehicle. Lifting the vehicle with a jack in those other locations could cause the vehicle to slip off the jack and roll; this could cause injury or death.

  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
  2. Remove the front tyre and wheel assembly. Refer to Tyre and Wheel Removal and Installation .
  3. Remove the front wheel bearing and hub assembly. Refer to Front Wheel Bearing and Hub Replacement .

  4. 2332714
  5. Remove the front brake shield (1).

Installation Procedure


    2332714
  1. Install the front brake shield (1).
  2. Install the front wheel bearing and hub assembly. Refer to Front Wheel Bearing and Hub Replacement .
  3. Install the tyre and wheel assembly. Refer to Tyre and Wheel Removal and Installation .
   


© Copyright Chevrolet. All rights reserved