To the top of the document
Volt
   
GMDE Start Page Load static TOC Load dynamic TOC Help?

Torque Damper Removal


2371913

Callout

Component Name

1

Lock Pin

Warning: Lock pin must be secured into the bench fixture to hold the transmission and prevent bodily injury.

Warning: Handle with care, the transmission assembly weighs over 183 Kg (403 lbs). Bodily injury could occur if not handled properly.

Tip
Ensure the DT 3289-20 holding fixture is mounted to a bench that is properly supported and will support the weight of the transmission assembly without tipping. DT 39890 adaptor and an engine stand can be used as an alternative method for supporting the transmission during repairs.

Special Tools

    • DT 3289-20 Holding Fixture Base Assembly
    • DT 39890 Transmission Holding Fixture Adaptor

For equivalent regional tools, refer to Special Tools .

2

Converter Holding Strap

Special Tool

DT 21366 Converter Holding Strap

For equivalent regional tools, refer to Special Tools .

3

Automatic Transmission Torque Damper Assembly

Caution: Failure to raise the torque damper assembly straight up could damage the torque damper clutch lip seal inside the torque damper clutch assembly.

   


&#169© Copyright Chevrolet. All rights reserved