1

Control Valve Body Cover Bolt M6 x 35 mm (Qty: 10)

2

Auxiliary Pump Motor Cable Retainer

3

Fluid Level Control Valve Stud M6 x 40 (Qty: 5)

4

Control Valve Body Cover Assembly

5

Control Valve Body Cover Gasket

6

Control Valve Body Cover Wiring Connector Hole Seal

Tip
Seal may stay with the cover.

7

Electrical Connector

8

Electrical Connector

9

A/Trans Manual Shift Shaft Position Switch Connector

10

Control Solenoid (w/Body and TCM) TEHCM Valve Assembly Connector

11

Fluid Cooler Outlet Pipe Assembly Bolt M5 x 16 mm (Qty: 2)

12

Variable Drive Pulley Retaining Nut

13

Control Valve Body Bolt M6 x 80 mm (Qty: 1)

14

A/Trans Wiring Extension Harness Assembly

Tip
The wiring harness is attached to the fluid cooler outlet pipe assembly and they will come out together.

15

Transmission Fluid Cooler Outlet Pipe Assembly

16

Nylon O-Ring

17

Transmission Fluid Cooler Outlet Seal

Tip
Discard seal, it is not reusable.