1

Drive Motor/Generator Stator Bolt M6 x 20 mm (Qty: 4)

2

Generator/Drive Motor Stator Cooling Tube Assembly (RHS)

3

Drive Motor/Generator Stator Cooling Tube Seal (Qty: 2)

Tip
Discard seal, it is not reusable.

4

Drive Motor/Generator Power Inverter Module Cable Connector Bolt M6 x 25 mm (Qty: 3) - Internal

5

Auxiliary Pump Motor Cable Retainer - 3 Phase - Cable A/3-PH Motor

6

Drive Motor/Generator Power Inverter Module Cable Stud M6 x 20 mm (Qty: 3)

7

Drive Motor/Generator Power Inverter Module Cable Assembly - 3 Phase - A

8

Drive Motor/Generator Power Inverter Module Cable Assembly Seal - 3 Phase

Tip
Discard seal, it is not reusable.

9

Drive Motor/Generator Power Inverter Module Cable Housing Cover Seal

Tip
Discard seal, it is not reusable.

10

Temperature Sensor Connector

11

Generator/Drive Motor Rotor and Stator Assembly - Unit A

Warning: The generator motor weighs approximately 23 kg (50 lbs). Personal injury may result if you lift the generator motor improperly.

12

Generator/Drive Motor Stator Cooling Tube Assembly (LHS)

Tip
This tube assembly may come out with the motor.