Volt |
||||||||
|
|
Table 1: | A/Trans Fluid Pump Cover Assemble |
Table 2: | Electric Auxiliary Pump Drive Motor Assemble |
Callout | Component Name |
---|---|
Preliminary ProcedureBefore assembly of the pump cover, measure the gears for wear. Refer to Fluid Pump Selective Specifications . | |
1 | A/Trans Fluid Pump Body Assembly |
2 | A/Trans Auxiliary Fluid Pump Driven Gear - Selective |
3 | A/Trans Auxiliary Fluid Pump Drive Gear - Selective |
4 | A/Trans Fluid Pump (O-Ring) Seal |
5 | A/Trans Fluid Pump Driven Gear - Selective |
6 | A/Trans Fluid Pump Drive Gear - Selective |
7 | A/Trans Fluid Pump Cover |
8 | A/Trans Fluid Pump Cover Bolt M6 x 25 mm (Qty: 19) Caution: Refer to Fastener Caution in the Preface section. ProcedureTighten in sequence shown. Tighten |
Callout | Component Name |
---|---|
1 | A/Trans Auxiliary Fluid Pump Motor Seal |
2 | Electric Auxiliary Pump Drive Motor Assembly |
3 | A/Trans Auxiliary Fluid Pump Bolt M5 x 16 (Qty: 1) Tighten |
4 | A/Trans Auxiliary Fluid Pump Bolt M8 x 51 mm (Qty: 4) ProcedureTighten the bolts in sequence shown. Tighten |
© Copyright Chevrolet. All rights reserved |