To the top of the document
Volt
   
GMDE Start Page Load static TOC Load dynamic TOC Help?

Front Differential Carrier Installation


2372074

Callout

Component Name

1

Front Differential Carrier Baffle (Case)

Tip
Before installation, inspect the debris collection magnet that is located on the underside of the baffle.

2

Front Differential Carrier Baffle Bolt M6 x 20 mm (Qty: 3)

Caution: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

Tighten
9 N·m (80 lb in)

3

Front Differential Carrier Assembly (FWD)

   


© Copyright Chevrolet. All rights reserved