To the top of the document
Volt
   
GMDE Start Page Load static TOC Load dynamic TOC Help?

Control Valve Body Cleaning and Inspection


2372084

Callout

Component Name

Warning: Valve springs can be tightly compressed. Use care when removing retainers and plugs. Personal injury could result.

Caution: After cleaning the transmission components, allow to air dry. Do not use cloth or paper towels in order to dry any transmission components. Lint from the towels can cause component failure.

Caution: Do not reuse cleaning solvents. Previously used solvents may deposit sediment which may damage the component.

Preliminary Procedure

Clean and inspect all valve components and the valve body. The control valve body assembly is only replaceable as an assembly.

1

Shift Solenoid Valve Train

2

Variable Hi and 2-3-4 Clutch and Drive Motor/Generator Stator Cooling Regulator Boost Valve Train

3

A/Trans Torque Damper Bypass Clutch Valve Train

4

Actuator Feed Limit Valve Train

5

Cooler Feed Limit Valve Train

6

1-3 Reverse Clutch and Generator/Drive Motor Stator Cooling Regulator Valve Train

7

Variable Hi and 2-3-4 Clutch and Drive Motor/Generator Stator Cooling Regulator Valve Train

8

Variable Low and 1-2 Reverse and 4th Clutch and Drive Motor/Generator Stator Cooling Regulator Valve Train

9

Shift Solenoid Valve Train

10

1-2 Reverse and 4th Clutch Regulator Boost Valve Train

11

Control Valve Body Ball Check Valve

12

Modulated Fluid Pressure Orifice

13

Modulated Fluid Pressure Orifice

   


© Copyright Chevrolet. All rights reserved