To the top of the document
Volt
   
GMDE Start Page Load static TOC Load dynamic TOC Help?

Air Cleaner Assembly Replacement


2415360

Callout

Component Name

Preliminary Procedure

Disconnect the air cleaner resonator duct from the air cleaner assembly. Refer to Air Cleaner Resonator Outlet Duct Replacement .

1

Air Cleaner Assembly

Note: Ensure lower flap of Air Inlet Tube is positioned between Wiring Harness and CRFM, the Flap should not overlap harness. Squeezing the air inlet tube (squeezing the lower flap upward) during install, the flap will clear the harness and fall into the correct location when the upper retainer is secured.

Procedure

  1. Disconnect the electrical connectors.
  2. Transfer parts as necessary.
   


© Copyright Chevrolet. All rights reserved