To the top of the document
Volt
   
GMDE Start Page Load static TOC Load dynamic TOC Help?

High Mount Brake lamp Replacement


2382064

Callout

Component Name

Preliminary Procedures

  1. Open and support the tailgate assembly.
  2. Remove the tailgate lower trim finish panel. Refer to Tailgate Lower Trim Finish Panel Replacement .
  3. Disconnect the high mount brake lamp electrical connector from the main tailgate harness.

1

High Mount Brake Lamp Access Hole Cover (Qty: 2)

2

High Mount Stop Lamp Screw (Qty: 2)

Caution: Refer to Fastener Caution in the Preface section.

Tighten
2.5 N·m (22 lb in)

3

High Mount Brake Lamp

Procedure

Remove the high mount brake lamp and harness connector from the rear end spoiler.

   


© Copyright Chevrolet. All rights reserved