Preliminary Procedures

1. Open and support the tailgate assembly.
2. Remove the rear bumper fascia. Refer to Rear Bumper Fascia Removal and Installation : Volt → Ampera .

1

Quarter Panel Tail Lamp Moulding Screw (Qty: 3)

Caution: Refer to Fastener Caution in the Preface section.

Tighten
2.5 N·m (22 lb in)

2

Rear Bumper Fascia Upper Retainer Grommet

3

Quarter Panel Tail Lamp Moulding

Tip
Lift the quarter panel tail lamp moulding from the tail lamp pocket.