Strut, Strut Component, or Spring Replacement
Special Tools
• | CH 6066 Strut Spring Compressor |
For equivalent regional tools, refer to Special Tools
Disassembly Procedure
- Remove the front suspension strut from the vehicle. Refer to Strut Assembly Removal and Installation .
- Install the front suspension strut (2) in the CH 6066 compressor (1).
Note: The spring is compressed when the strut moves freely.
- Using the CH 6066 compressor , compress the front spring.
- Using a TORX® bit (1) and the CH 35669 spanner (2), remove the front suspension strut nut.
- Remove the front suspension strut (2) from the CH 6066 compressor .
- Remove the front suspension strut mount and the front spring from the CH 6066 compressor .
Assembly Procedure
- Install the front spring and front suspension strut mount (2) to the CH 6066 compressor (1).
- Using the CH 6066 compressor (1), compress the front spring (2).
- Hand-tighten the front suspension strut nut.
Caution: Refer to Fastener Caution in the Preface section.
Note: Use the proper size TORX® bit, hold the strut shaft.
- Using the CH 35669 spanner (2) and the TORX® bit (1), tighten the front suspension strut nut to 70 N·m (52 lb ft).
- Remove the front suspension strut from the CH 6066 compressor .
- Install the front suspension strut to the vehicle. Refer to Strut Assembly Removal and Installation .
©© Copyright Chevrolet. All rights reserved |