Preliminary Procedure

1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
2. Remove the tyre and wheel assembly. Refer to Tyre and Wheel Removal and Installation .
3. Remove the rear brake rotor. Refer to Rear Brake Rotor Replacement .
4. Remove the rear speed sensor, if equipped. Refer to Rear Wheel Speed Sensor Replacement .

1

Rear Wheel Hub Bolt (Qty: 4)

Caution: Refer to Fastener Caution in the Preface section.

Procedure

1. Remove the bolt and replace with NEW only.
2. Apply thread locker the rear wheel hub bolts. Refer to Adhesives, Fluids, Lubricants, and Sealers .

Tighten

1. First Pass: 50 N·m (37 lb ft).
2. Final Pass: additional 40 degrees.

2

Rear Wheel Hub Assembly

3

Rear Disc Brake Backing Plate

4

Rear Brake Caliper Mounting Bracket