To the top of the document
Volt
   
GMDE Start Page Load static TOC Load dynamic TOC Help?

Reverse Lamp Replacement


2382062

Callout

Component Name

Preliminary Procedure

  1. Remove the underbody rear air deflector. Refer to Underbody Rear Air Deflector Replacement .
  2. Disconnect the electrical connector from the tail lamp harness.
  3. Transfer the electrical connector jumper harness as needed.

1

Rear Bumper Fascia Lower Screw (Qty: 2)

Caution: Refer to Fastener Caution in the Preface section.

Tighten
2.5 N·m (22 lb in)

2

Rear Energy Absorber Screw (Qty: 2)

Caution: Refer to Fastener Caution in the Preface section.

Tighten
2.5 N·m (22 lb in)

3

Reverse Lamp

   


© Copyright Chevrolet. All rights reserved