To the top of the document
Volt
   
GMDE Start Page Load static TOC Load dynamic TOC Help?

Front Side Door Window Belt Reveal Molding Replacement - Upper


2374096

Callout

Component Name

Preliminary Procedure

It will be necessary to remove the lower bright chrome reveal molding to expose the screws. Refer to Front Side Door Window Belt Reveal Molding Replacement : Lower → Upper .

1

Front Side Door Window Belt Reveal Molding Frame Screw

Caution: Refer to Fastener Caution in the Preface section.

Procedure

Place the door window in the full down position.

Tighten
2.5 N·m (22 lb in)

Tip
Do Not remove the outside wing mirror for this procedure.

2

Front Side Door Window Belt Reveal Molding Frame Screws (Qty: 5)

Tighten
2.5 N·m (22 lb in)

3

Front Side Door Window Belt Reveal Molding Push-In Retainers (Qty: 2)

Tip
Lift upward on the molding and sealing strip releasing it from the pinchweld flange.

4

Front Side Door Window Belt Reveal Molding

Tip
Inspect the window for proper operation before installing the door trim panel.

   


© Copyright Chevrolet. All rights reserved