To the top of the document
Volt
   
GMDE Start Page Load static TOC Load dynamic TOC Help?

Brake Pressure Modulator Valve Bracket Replacement

Removal Procedure

  1. Without separating the brake pressure modulator valve (BPMV) from the electronic brake control module (EBCM), remove the EBCM. Refer to Electronic Brake Control Module Replacement .

  2. 2375852
  3. Remove the 2 BPMV bolts (1).

  4. 2375853
  5. Remove the bracket (1) from the BPMV/EBCM assembly.

Installation Procedure


    2375853
  1. Install the bracket (1) to the BPMV/EBCM assembly.
  2. Caution: Refer to Fastener Caution in the Preface section.


    2375852
  3. Install the 2 BPMV bolts (1) and tighten to 8 N·m (71 lb in).
  4. Install the BPMV/EBCM assembly. Refer to Electronic Brake Control Module Replacement .
   


© Copyright Chevrolet. All rights reserved