Volt

Electronic Brake Control Module with Brake Pressure Modulator Valve Replacement

1. Remove the electronic brake control module (EBCM). Refer to Electronic Brake Control Module Replacement .



2. Remove the 2 brake pressure modulator valve (BPMV) bolts (1).



3. Remove the BPMV (1) from the bracket (2).

1. Install the BPMV assembly (1) to the bracket (2).

Caution: Refer to Fastener Caution in the Preface section.




2. Install the 2 BPMV bolts (1) and tighten to 8 N·m (71 lb in).
3. Install the EBCM. Refer to Electronic Brake Control Module Replacement .