Preliminary Procedures

1. Remove the upper rear side door belt reveal molding. Refer to Rear Side Door Window Belt Reveal Molding Replacement : Lower → Upper .
2. Remove the rear side door window. Refer to Rear Side Door Window Replacement .

1

Rear Side Door Window Upper Weatherstrip Screw

Tip
Reposition the door weatherstrip to access.

2

Rear Side Door Window Outer Weatherstrip Screw

Tighten
2 N·m (22 lb in)

Tip
The screw is located under the outer weatherstrip, in the lower fame.

3

Rear Side Door Window Weatherstrip Lower Bolt (Qty: 2)

Tighten
11 N·m (97 lb in)

4

Rear Side Door Window Weatherstrip

Procedure

Grasp the rear top corner of the outer window and weatherstrip, pull rearward and down releasing the assembly from the door frame.

Tip
Inspect the window for proper operation before installing the door trim panel.