To the top of the document
Volt
   
GMDE Start Page Load static TOC Load dynamic TOC Help?

Range Selector Lever Cable Adjustment

    Note: Adjust the automatic transmission range selector cable while the transmission and the gear selector are in the Park position only. Failure to do so may cause mis-adjustment.

  1. Set the park brake and chock the wheels.

  2. 2385023
  3. Pull the retaining collar (1) forward, then release the range select cable adjuster clip (2) by pushing out on the adjuster clip from the side.
  4. Verify the transmission range select lever is in the park position.
  5. Verify the transmission shift control lever is in the park position.

  6. 2385023
  7. Depress the adjuster clip (2) locking the adjuster clip completely, then release the retaining collar.
  8. Ensure that the cable adjuster is secured.
  9. Check the transmission range select lever in all gear selections for proper operation.
   


© Copyright Chevrolet. All rights reserved