To the top of the document
Volt
   
GMDE Start Page Load static TOC Load dynamic TOC Help?

Front Side Door Lock Replacement


2394087

Callout

Component Name

Preliminary Procedures

  1. Release tension on the window by lowering the window slightly.
  2. Reposition the rear half of the front side door window regulator. Refer to Front Side Door Window Regulator Replacement .
  3. Reposition the front side door rear channel of the front side door window outer weatherstrip. Refer to Front Side Door Window Outer Weatherstrip Replacement .

1

Front Side Door Lock Screws (Qty: 3)

Caution: Refer to Fastener Caution in the Preface section.

Procedure

Disconnect the door lock electrical connector.

Tighten
10 N·m (89 lb in)

2

Front Side Door Lock

Procedure

  1. Unclip the outside handle rod from the door lock.
  2. Turn the lock assembly releasing the lock cylinder rod from the lock.
  3. Transfer components as necessary.
  4. In order to prevent outside handle lever pre-load, latch, outside handle, handle bracket and cover/cap shall be fully secured to the door prior to securing integral latch clip to outside handle rod. Integral latch clip shall be in the full up position while securing to outside handle rod. Refer to Front Side Door Outside Handle Rod Adjustment .

Tip
Inspect the door lock system for proper operation before installing the door trim panel.

   


© Copyright Chevrolet. All rights reserved