Preliminary Procedures

1. Open and suitably support the bonnet.
2. Remove the front compartment front sight shield. Refer to Front Compartment Front Sight Shield Replacement : Volt → Ampera .
3. Remove the windscreen washer solvent container filler tube. Refer to Windscreen Washer Solvent Container Filler Tube Replacement .

1

Windscreen Washer Solvent Container Grommet

Procedure

1. Carefully squeeze the grommet while using a flat-bladed tool to pry upward under the edge of the grommet.
2. When installing a new grommet, use full strength windscreen washer fluid as a lubricant on the grommet.
3. Place the grommet to the windscreen washer solvent container.
4. Use the palm of the hand to seat the grommet into the windscreen washer solvent container.