1

Front Side Door Lock Cylinder Screw Cover

Procedure

1. Do Not remove the inside door trim.
2. Use a flat-bladed tool to remove the cylinder opening access cover.

2

Front Side Door Lock Cylinder Screw

Caution: Refer to Fastener Caution in the Preface section.

Procedure

1. Do Not remove the lock cylinder screw completely from the housing. Unscrew the screw to a hard stop, remove the lock cylinder.
2. It is not necessary to remove the outside door handle or housing to replace the lock cylinder.

Tighten
5 N·m (44 lb in)

3

Front Side Door Lock Cylinder

Procedure

1. Pull the lock cylinder from the housing.
2. Remove the lock cylinder bezel from the cylinder.
3. Use a suitable tool to release the lock cylinder bezel.

Note: Pull the outside handle to release the door lock cylinder.