To the top of the document
Volt
   
GMDE Start Page Load static TOC Load dynamic TOC Help?

Engine Block Assemble


    2190941
  1. Install the knock sensor (2).
  2. Caution: Refer to Fastener Caution in the Preface section.

  3. Install the knock sensor bolt (3) and tighten to 20 N·m (15 lb ft).
  4. Install the 2 cylinder head guide sleeves (1). Use a rubber mallet.
  5. Install the 2 transmission guide sleeves (4, 5). Use a rubber mallet.
   


© Copyright Chevrolet. All rights reserved