Volt

Camshaft Timing Chain Installation

Special Tools

For equivalent regional tools, refer to Special Tools .

1. The engine should be adjusted to TDC.
2. The crankshaft should be fixed with EN-952 fixing pin.
3. The camshaft should be fixed with EN-953-A fixing tool.



4. Install the timing chain (1) in compound with the crankshaft sprocket (2).



5. Install the timing chain tensioner shoe (1).

Caution: Refer to Fastener Caution in the Preface section.

6. Install the timing chain tensioner shoe bolt (2) and tighten to 20 N·m (15 lb ft).



7. Install the timing chain guide right side (1).
8. Install the 2 timing chain guide right side bolts (2) and tighten to 8 N·m (71 lb in).



9. Push the timing chain (2) in direction to the timing chain tensioner (1) and remove EN-955-1 fixing pin (3).

The upper timing chain guide will be installed after the installation of the engine front cover and the fastening of the camshaft sprockets.