To the top of the document
Volt
   
GMDE Start Page Load static TOC Load dynamic TOC Help?

Ignition Coil Installation

Special Tools

EN-6009 Remover and Installer Ignition Module

For equivalent regional tools, refer to Special Tools .


    2190646
  1. Install the ignition coil (1) and remove EN-6009 remover and installer (2).

    2. Caution: Refer to Fastener Caution in the Preface section.


    2190645
  2. Install the 2 ignition coil bolts (1) and tighten to 8 N·m (71 lb in).
   


© Copyright Chevrolet. All rights reserved