To the top of the document
Volt
   
GMDE Start Page Load static TOC Load dynamic TOC Help?

Engine Coolant Thermostat Housing Installation

  1. Clean the sealing surfaces.

  2. 2190371
  3. Install the engine coolant thermostat housing (2) and a NEW engine coolant thermostat housing seal ring (3).
  4. Caution: Refer to Fastener Caution in the Preface section.

  5. Install the 3 engine coolant thermostat housing bolts (1) and tighten to 8 N·m (71 lb in).
   


© Copyright Chevrolet. All rights reserved