Volt
Exhaust Manifold Installation
Clean the exhaust manifold and the cylinder head sealing surfaces from old gasket material.
Install a NEW exhaust manifold gasket (2).
Install the exhaust manifold (1).
Install the 9 exhaust manifold nuts (1) and hand-tighten.
Install the 2 catalytic converter bracket bolts (1) to the catalytic converter bracket (2).
Caution:
Refer to
Fastener Caution
in the Preface section.
Tighten the 9 exhaust manifold nuts to
22 N·m (16 lb ft)
.
Tighten the 2 catalytic converter bracket bolts to
10 N·m (89 lb in)
.
© Copyright Chevrolet. All rights reserved