Automatic Transmission Flex Plate Installation
Special Tools
• | EN-49979 Crankshaft Shock Mount Retainer. |
• | EN-470-B Angular Torque Wrench . |
For equivalent regional tools, refer to Special Tools .
- Install the flex plate (1).
- Install the flex plate bolt washer (2) and the 6 flex plate bolts (3).
- Install EN-49979 retainer to EN-956-1 extension .
- Install EN-49979 retainer (1) in compound with EN-956-1 extension (2) to the crankshaft balancer as shown.
Caution: Refer to Fastener Caution in the Preface section.
- Tighten the 6 flex plate bolts to 35 N·m (26 lb ft).
- Tighten the 6 flex plate bolts to an additional 30°. Use EN-470-B wrench .
- Tighten the 6 flex plate bolts to an additional 15°. Use EN-470-B wrench .
©© Copyright Chevrolet. All rights reserved |