Preliminary Procedures

1. Remove the I/P Lower Trim Panel Insulator Refer to Instrument Panel Lower Trim Panel Insulator Replacement .
2. Remove the right side floor front air outlet duct. Refer to.Floor Front Air Outlet Duct Replacement - Right Side
3. Reposition any wiring or hoses to gain access to blower motor control.

1

Blower Motor Control Module Screw (Qty: 2)

Caution: Refer to Fastener Caution in the Preface section.

Tighten
2 N·m (17 lb in)

2

Blower Motor Control Module

Procedure

Disconnect the wiring connector.