Radiator Outlet Front Hose Replacement
Special Tools
BO-38185 Hose Clamp Pliers
For equivalent regional tools, Refer toSpecial Tools
Removal Procedure
Note: Replace corroded hose clamps and brackets.
- Remove the air cleaner resonator outlet duct. Refer to Air Cleaner Resonator Outlet Duct Replacement
- Remove the heater coolant heater air supply hose from the radiator outlet front hose. Refer to Heater Coolant Heater Air Supply Hose Replacement
- Disconnect the radiator outlet front hose quick connect (1) at engine.
- Remove the radiator outlet front hose (2) from the engine.
Danger: Do not use a service jack in locations other than those specified to lift this vehicle. Lifting the vehicle with a jack in those other locations could cause the vehicle to slip off the jack and roll; this could cause injury or death.
- Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle
- Remove the radiator outlet front hose clamp (1) at radiator using BO-38185 Hose Clamp Pliers .
- Remove the radiator outlet front hose (2) from the radiator.
- Remove the radiator outlet front hose from the vehicle.
Installation Procedure
- Install the radiator outlet front hose to the vehicle.
- Install the radiator outlet front hose (2) to the radiator.
- Install the radiator outlet front hose clamp (1) at radiator using BO-38185 Hose Clamp Pliers .
- Install the radiator outlet front hose (2) to the engine.
- Connect the radiator outlet front hose quick connect (1) at engine.
- Lower the vehicle.
- Install the heater coolant heater air supply hose to the radiator outlet front hose. Refer to Heater Coolant Heater Air Supply Hose Replacement
- Remove the air cleaner resonator outlet duct. Refer to Air Cleaner Resonator Outlet Duct Replacement
- Fill the cooling system. Refer to Cooling System Draining and Filling
© Copyright Chevrolet. All rights reserved |