Preliminary Procedure

1. Remove the HVAC module. Refer to Air Conditioning and Heater Module Assembly Removal and Installation .
2. Reposition any wiring harnesses before removal.

1

Air Distribution Case Screw Qty: (7)

Caution: Refer to Fastener Caution in the Preface section.

Tighten
3 N·m (27 lb in)

2

Air Distribution Case

Procedure

1. Prior to removing the air distribution case, note the routing of the wiring to ensure proper reinstallation.
2. Disconnect all electrical connections.
3. When replacing the air distribution case, transfer all necessary components.