To the top of the document
Volt
   
GMDE Start Page Load static TOC Load dynamic TOC Help?

Rear Side Door Lock Cylinder Opening Cover Replacement


1868783

Callout

Component Name

1

Rear Side Door Lock Cylinder Clamp Access Plug

Tip
Use a suitable tool to remove the cover.

2

Rear Side Door Lock Cylinder Clamp Screw

Caution: Refer to Fastener Caution in the Preface section.

Procedure

Do Not remove the cylinder clamp screw completely from the housing, unscrew the screw to a hard stop, releasing the blank cylinder from the housing.

Tip
It is not necessary to remove the outside door handle or housing to replace the cylinder.

Tighten
5 N·m (44 lb in)

3

Rear Side Door Lock Cylinder Cover

4

Rear Side Door Lock Cylinder

Procedure

  1. Ensure that the lock cylinder gasket is in place when installing the lock cylinder to the handle.
  2. Inspect the door lock system for proper operation before installing the door trim panel.
   


© Copyright Chevrolet. All rights reserved