Preliminary Procedure

1. Drain the coolant. Refer to Drive Motor Generator Power Inverter Module Cooling System Draining and Filling
2. Remove the front bumber fascia. Refer to Front Bumper Fascia Removal and Installation : Volt → Ampera

1

Generator Control Module Coolant Radiator Hose Clamp

Procedure

Reposition the generator control module coolant radiator hose clamp using BO-38185 Hose Clamp Pliers

Special Tools

BO-38185 Hose Clamp Pliers

For equivalent regional tools, Refer toSpecial Tools

2

Generator Control Module Coolant Radiator Hose Quick Connect

3

Generator Control Module Coolant Radiator Hose

Tip
Replace corroded hose clamps and brackets.