Preliminary Procedures

1. Remove the front bumper fascia. Refer to Front Bumper Fascia Removal and Installation : Volt → Ampera .
2. Place a clean suitable drain pan under the windscreen washer solvent container to contain any lost windscreen washer solvent.

1

Windscreen Washer Pump

Procedure

1. Disconnect the electrical connector for the windscreen washer pump.
2. Disconnect the windscreen washer pump hose.
3. Using two flat-bladed tools underneath the washer pump grommet, turn the flat-blades in opposite directions to disengage the washer pump from the washer pump grommet.
4. Remove the washer pump grommet and discard.