To the top of the document
Volt
   
GMDE Start Page Load static TOC Load dynamic TOC Help?

Drive Motor Battery Radiator Inlet Hose Replacement


2399475

Callout

Component Name

Danger: Do not use a service jack in locations other than those specified to lift this vehicle. Lifting the vehicle with a jack in those other locations could cause the vehicle to slip off the jack and roll; this could cause injury or death.

Preliminary Procedure

  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle
  2. Remove the front wheelhouse front liner on passenger side. Refer to Front Wheelhouse Front Liner Replacement
  3. Place a drain pan under the vehicle.

1

Drive Motor Battery Radiator Inlet Hose Clamp

Procedure

Reposition the drive motor battery radiator inlet hose clamp using BO-38185 Hose Clamp Pliers

Special Tools

BO-38185 Hose Clamp Pliers

For equivalent regional tools, Refer toSpecial Tools

2

Drive Motor Battery Radiator Inlet Hose Quick Connect

3

Drive Motor Battery Radiator Inlet Hose

Tip
Unclip hose from drive motor generator control module cooling outlet hose.

Tip
Replace corroded hose clamps and brackets.

   


© Copyright Chevrolet. All rights reserved