To the top of the document
Volt
   
GMDE Start Page Load static TOC Load dynamic TOC Help?

Generator Control Module Coolant Tank Hose Replacement


2392398

Callout

Component Name

Preliminary Procedures

  1. Drain the coolant. Refer to Drive Motor Generator Power Inverter Module Cooling System Draining and Filling
  2. Remove the left front headlamp. Refer to Headlamp Replacement : Volt → Ampera

1

Generator Control Module Coolant Tank Hose Clamps (Qty: 2)

Procedure

Reposition the generator control module coolant tank hose clamps using BO-38185 hose clamp pliers .

Special Tools

BO-38185 Hose Clamp Pliers

For equivalent regional tools, Refer toSpecial Tools

2

Generator Control Module Coolant Tank Hose

Procedure

Unclip drive motor battery radiator outlet hose from hose.

Tip
Replace corroded hose clamps and brackets.

   


© Copyright Chevrolet. All rights reserved