Crankshaft Rear Oil Seal Replacement
Special Tools
EN-658 Rear Main Seal Installer
For equivalent regional tools, refer to Special Tools .
Removal Procedure
- Remove the automatic transmission flex plate. Refer to Automatic Transmission Flex Plate Replacement .
Note: Do not damage the outside diameter of the crankshaft or chamber with any tool.
- Using a flat-bladed tool, remove the rear crankshaft oil seal (1).
Installation Procedure
- Install the crankshaft rear oil seal (1) with EN-658 installer (2).
- Using the EN-658 installer (2) , install a NEW crankshaft real oil seal (1).
- Install the automatic transmission flex plate. Refer to Automatic Transmission Flex Plate Replacement .
© Copyright Chevrolet. All rights reserved |